THE BAG CONTAINS 25 PATCHES for DEXCOM G7 (18 in RAINBOW). The bag also includes instructions.
DIMENSIONS PATCH: 7 x 6.6 cm (LxW) - HOLE 2.80 x 2.45 (LxW) - BAG: 18 x 14 cm (LxW)
A PATCH is an adhesive patch with a hole for common diabetes technology, such as sensors, pumps, and infusion sets. The main purpose of the patch is to extend the area that adheres to the skin, thereby ensuring that the device's own adhesive stays on the body for the entire duration, until the pump or sensor would be changed anyway.
MATERIAL A thin, strong, and stretchy textile material that follows the body's movements, breathes, and adheres well even when wet. 97% cotton and 3% lycra.
The patch has an approved medical adhesive according to European standard (ISO 10993) which is hypoallergenic and latex-free. The adhesive is applied in a wave pattern for improved breathability and adhesion. It also looks a bit stylish.
USAGE All people have different skin types, and although our patches are very gentle, our recommendation is to apply the patch as late as possible, meaning wait until you know you will be spending a lot of time in water or doing strenuous physical activity that involves a lot of sweating. This is to ensure that the patch does not come off prematurely while also being gentle on the skin. This mainly applies to sensors that stay in the same place for a long time (10-14 days). Should the patch start to come loose, we recommend cutting off the part that has started to detach and possibly then applying another patch over the old one.
APPLICATION The patch is on a thin white cardboard film that is perforated through the middle, making it easy to apply to the skin.
- First, ensure the skin is clean and dry in the area where the patch will be placed. Be careful not to apply patches to areas with sunburned or otherwise damaged skin.
- Gently pull apart the cardboard film at the perforation so you can see a little of the colored backing. Carefully remove one half and apply half of the patch to the skin without touching too much of the sticky surface.
- Once the first half of the patch is adhered to the skin, then remove the other part of the film and apply the rest of the patch.
- Pat and rub with a finger around the entire applied patch to ensure it is firmly attached.
REMOVAL We recommend using an adhesive remover spray (e.g., Niltac). Spray on and let it work for a few seconds. Then quickly pull off the patch and wipe away any residue so that the skin is clean and smooth. Moisturize with a rich skin cream to keep the skin soft and supple.
